Parallel Shaft Geared Motors
LS Series
Product Features
- Vented gearhousing for extended seal life
- Auxiliary lip seals on motors and output shaft to prevent from dust and other contamininants
- Needle bearing on output shaft to increase radial load capacity and longer life
- Permanently lubricated gearing utilizing oil for long life
- Helical pinion accurately cut on motor shaft for maximum strength and minimum noise.
| 1. Series | 3. Voltage DC | 4. Gear Ratio | 5. Output Shaft | ||||
| LS8 | LS Type Geared Motor | A | DC12V | 11 | 1:11 | M | Key & D Cut |
| 2. Motor Length | B | DC24V | 18 | 1:18 | K | Key | |
| 1 | – | C | DC36V | 19 | 1:19 | D | D-Cut |
| 2 | – | D | DC48V | 28 | 1:28 | ||
| 3 | 60 | E | DC90V | 38 | 1:38 | ||
| 4 | 76 | F | DC110V | 54 | 1:54 | ||
| 5 | – | G | DC130V | 62 | 1:62 | ||
| H | DC180V | 83 | 1:83 | ||||
| I | DC220V | 100 | 1:100 | ||||
| 210 | 1:210 | ||||||
| 332 | 1:332 | ||||||
| Model | Voltage DC |
Full load Nameplate RPM |
Torque (in-lb) |
Overhung Load (lb) |
Input HP | Gear Ratio | Full Load Amps | Length less Shaft (in) | Replaceable Brushes |
| LS84E18K | 90 | 104 | 27 | 224 | 1/20 (37W) | 1:18 | 0.63 | 8 1/2 | S9MCS |
| LS84E38K | 90 | 49 | 55 | 281 | 1/20 (37W) | 1:38 | 0.63 | 8 1/2 | |
| LS84E54K | 90 | 35 | 82 | 318 | 1/20 (37W) | 1:54 | 0.63 | 8 1/2 | |
| LS84E100K | 90 | 19 | 150 | 385 | 1/20 (37W) | 1:100 | 0.63 | 8 1/2 | |
| LS84E210K | 90 | 9 | 227 | 464 | 1/20 (37W) | 1:210 | 0.63 | 8 1/2 | |
| LS84E332K | 90 | 5.7 | 250 | 565 | 1/20 (37W) | 1:332 | 0.63 | 8 1/2 | |
| LS85E11K | 90 | 158 | 43 | 197 | 1/8 (93W) | 1:11 | 1.4 | 10 1/7 | |
| LS85E19K | 90 | 96 | 77 | 236 | 1/8 (93W) | 1:19 | 1.4 | 10 1/7 | |
| LS85E28K | 90 | 65 | 113 | 267 | 1/8 (93W) | 1:28 | 1.4 | 10 1/7 | |
| LS85E38K | 90 | 48 | 138 | 277 | 1/8 (93W) | 1:38 | 1.4 | 10 1/7 | |
| LS85E62K | 90 | 30 | 220 | 327 | 1/8 (93W) | 1:62 | 1.4 | 10 1/7 | |
| LS85E83K | 90 | 22 | 280 | 353 | 1/8 (93W) | 1:83 | 1.4 | 10 1/7 |