Hollow Rotary Table

SHB Series

Hollow Rotary Table Feature Overview

Clamp-Ring

Dynamic balanced clamp ring mechanism

  • Error-Free installation and the balanced clamping system allows higher input speeds and no backlash for power transmission.
Motor-Flange

Universal mounting motor flange

  • Allows quicker delivery and easier mounting to any stepping motor and servo motor.
helicalgear

High torque & low backlash

  • Helical gear type planetary gearing.
  • Improvement of wear resistance by gear heat treatment.
Planetary-Bearing

Increased service life

  • Full complement needle planet bearings. (Solid uncaged needle roller bearings)

1. Series 2. Frame size ¶
SHB Hollow Rotary Table 060 60mm sq.
100 100mm sq.
130 130mm sq.
200 200mm sq.
275 275mm sq.
3. Available Motor 4. Gear Ratio [i] § Stage
S Stepping motor 005 005 1
Servo motor 008 008
010 010
024 1/24 2
030 1/30
032 1/32
040 1/40
050 1/50

¶ Some of these models may have different configurations depending on motor brands. Therefore, make sure to check its specification again when you order them.

§ Reduction ratio per model is different. Only 1 stage is valid for SHB 60.

Description SHB 060 SHB 100 SHB 130 SHB 200 SHB 275
Motor type Stepping motor & Servo motor
Output table supporting bearing Ball bearing Taper roller Bearing
Permissible Torque [ Gear Ratio, Stage 1 ] i=1/5 i=1/8 i=1/10 i=1/10 i=1/10
[N·m] 3.5 15 15 65 65
[ Gear Ratio, Staghe 2 ] i=1/24,32,40 i=1/30,40,50 i=1/30,40,50 i=1/30,40,50
[N·m] 15 15 65 65
Inertial moment [ Gear Ratio, Stage 1 ] i=1/5 i=1/8 i=1/10 i=1/10 i=1/10
[J: kg·m²] 1235×10 -7 29626.7×10 -7 64735×10 -7 371100×10 -7 496760×10 -7
[ Gear Ratio, Staghe 2 ] i=1/24,32,40 i=1/30,40,50 i=1/30,40,50 i=1/30,40,50
[J: kg·m²] 169548×10 -7
237005×10 -7
320658×10 -7
285911×10 -7
391300×10 -7
521995×10 -7
1151509×10 -7
1303762×10 -7
1554895×10 -7
2751875×10 -7
1981650×10 -7
1680525×10 -7
Lost motion [arcmin] 2 (0.033°)
Permissible thrust load [N] 30 1,300 2,000 2,000 3,500
Permissible moment load [N·m] 5 10 50 50 80
Runout of output table surface [mm] 0.030 0.015 0.015 0.015 0.015
Runout of output table inner(outer) diameter [mm] 0.030 0.015 0.015 0.030 0.030
Paralleism of output table [mm] 0.050 0.030 0.030 0.050 0.050
Degree of protection IP40
Ooperating Temp. [°C] -10 ~ +90
Weight [ Stage1, kg ] 0.68 2.6 4.6 11.2 15.3
[ Stage2, kg ] 3.3 5.3 13 17.1

SHB 060 (1 Stage, Ratio(i)=1/5)

SHB 100 (1 Stage, Ratio(i)=1/8)

SHB 100 (2 Stage, Ratio(i)=1/24~1/40)

SHB 130 (1 Stage, Ratio(i)=1/10)

SHB 130 (2 Stage, Ratio(i)=1/30~1/50)

SHB 200 (1 Stage, Ratio(i)=1/10)

SHB 200 (2 Stage, Ratio(i)=1/30~1/50)

SHB 275 (1 Stage, Ratio(i)=1/10)

SHB 275 (2 Stage, Ratio(i)=1/30~1/50)