Brushless Motors
XW Series
Product Features
- 10w, 25w, 40w, 90w
- Voltages 1 phase 100~120 VAC & 200~230 VAC , 50/60Hz
- Gear ratio available 5, 10, 15, 20, 30, 50, 100, 200 to 1
- Maximum 260 in-lbs torque(with gearhead)
- Speed control ranges from 100~2000 rpm
- Small size(max 4.76 inch, less shaft), high torque, modular gearhead system, speed stability (+/-1%) Overload protection, Instant Stop, Slow run and slow stop, Multi point speed setting
- UL/CSA/DEMKO certified
1. BLDC Series | 2. Frame size | ||
XWM | Standard BLDC Motor | 6 | 2.36″ sq. (60mm) |
8 | 3.15″ sq. (80mm) | ||
9 | 3.54″ sq. (90mm) | ||
3. Output | 4. Pinion Shaft | ||
10 | 10W | G | Gear Pinion |
25 | 25W | D | Flat(D-Vut) Pinion |
40 | 40W | ||
90 | 90W |
Type | Gear Type (D-cut Type) | XWM610G/XWM610D | XWM825G/XWM825D | XWM940G/XWM940D | XWM990G/XWM990D | ||||
Rated Output(continuos) W | 10 | 25 | 40 | 90 | |||||
Power Input | Voltage V | 1Ø, 100~200 | 1Ø, 200~230 | 1Ø, 100~200 | 1Ø, 200~230 | 1Ø, 100~200 | 1Ø, 200~230 | 1Ø, 100~200 | 1Ø, 200~230 |
Frequency | 50/60 | ||||||||
Rated Input current A | 0.6 | 0.35 | 0.9 | 0.56 | 1 | 0.64 | 2 | 1.2 | |
Maximum Input Current A | 0.8 | 0.5 | 1.2 | 0.8 | 1.3 | 0.9 | 2.6 | 1.6 | |
Rated Torque | N-m (lb-in) | 0.05(0.43) | 0.125(1.08) | 0.20(1.73) | 0.45(3.9) | ||||
Starting Torque | N-m (lb-in) | 0.06(0.52) | 0.25(1.3) | 0.24(2.08) | 0.54(4.68) | ||||
Motor Permissible Load Inertia Moment |
J kg-m2 | 0.5X10-4(2.7) | 1.8×10-4(9.8) | 3.3×10-4(18.1) | 5.8×10-4(31.7) | ||||
(oz-in2) | |||||||||
Rated Speed | r/min | 2000 | |||||||
Speed Control Range | r/min | 100 ~ 2,000 (Speed Ratio 1:20) |
|||||||
Speed Regulation | Load | Less than ±1% (0 ~ rated speed) |
|||||||
Voltage | Less than ±1% (supply voltage ±10%, at rated speed with no load |
||||||||
Temperature | Less than ±1% (0 ~ +40°C (+32 ~+104°F), at rated speed with no load |
1. BLDC Driver Series | 2. Output | 3. Voltage | |||||
XWD | Standard BLDC Driver | 10 | 10W | A | 1Ø 100~ 120VAC | ||
25 | 25W | B | 1Ø 200~230VAC | ||||
40 | 40W | ||||||
90 | 90W |
1. BLDC Series | 2. Frame size | ||||
XTG | Standard BLDC XWA Series Gearhead | 6 | 2.36″ sq. (60mm) | ||
8 | 3.15″ sq. (80mm) | ||||
9 | 3.54″ sq. (90mm) | ||||
3. Ratio – Reduction ratio | 4. Output | ||||
5 | 1/5 | 10 | 1/10 | K | Key type |
15 | 1/15 | 20 | 1/20 | ||
30 | 1/30 | 50 | 1/50 | ||
100 | 1/100 | 200 | 1/200 |
-
Permissible Torque with Gearhead
N-m/(lb-in) | |||||||||
Gearhead ratio | 5 | 10 | 15 | 20 | 30 | 50 | 100 | 200 | |
Speed variable range | 20-400 | 10-200 | 6.7-133 | 5-100 | 3.3-67 | 2-40 | 1-20 | 0.5-10 | |
Model | XWM610 | 0.22(1.91) | 0.45(3.91) | 6.8(5.90) | 0.90(7.81) | 1.3(11.28) | 2.1(18.23) | 4.2(36.45) | 6.0(52.08) |
XWM825 | 0.56(4.86) | 1.12(9.72) | 1.8(14.58) | 2.2(19.09) | 3.2(27.77) | 5.3(46.00) | 10.6(92.00) | 16.0(138.87) | |
XWM940 | 0.90(7.81) | 1.80(15.62) | 2.70(23.43) | 3.60(31.25) | 5.1(44.27) | 8.5(73.78) | 17.0(147.55) | 30.0(260.38) | |
XWM990 | 2.10(17.36) | 4.10(34.72) | 6.00(52.08) | 8.00(69.44) | 11.5(99.44) | 19.3(167.51) | 30.0(260.38) | 30.0(260.38) |